STROOM MASTER® – DIRTY ELECTRICITY FILTER-€202.07 (VAT AND SHIPPING COSTS INCLUDED)

BUY IT FROM ONE OF THE FOLLOWING LINKS WITH THE DISCOUNT CODE (10%): BHITAL

(The first link use it to buy in Spain and Europe, the second link use it to buy in the rest of the world)

• https://www.enertexgroup.com/producto/stroom-master/
• https://www.spirosolution.com/es/producto/stroom-master-dirty-electricity-filter/

The STROOM MASTER® is a 2-in-1 solution for protection against dirty electricity and surrounding high frequency radiation. It has an active filter that cleans the noise in the power lines from harmonics and transients and all interference from radio signals that enter the wired system. We recommend installing the STROOM MASTER® using an EMI meter to ensure full interference reduction and the most efficient use of filters in a specific space.

Benefits of this kit:

• Ensures maximum reduction of dirty electricity throughout the building, maintaining optimal levels and avoiding peaks of dirty electricity generated in certain spaces of the building.
• The accumulated SPIRO® power promotes a reduction in interference from WiFi and Bluetooth signals in the environment, according to studies carried out.
• The installed system has shown to generate an optimization of electrical consumption.

CHARACTERISTICS

• AC filter for harmonics and transients (dirty electricity).
• Built-in 15 amp surge protector.
• Built-in SPIRO® technology (nanomagnetic polarizing filter).
• Cover a broader frequency spectrum (up to 300 GHz) with SPIRO.
• Testable functionality with a common EMI meter.
• LED on/off indicator.
• Damage resistant casing.
• Easy installation: just plug in.
• Built-in plug.
• 3 year limited warranty.
• UL quality compliance certification.

How to use it?

1. Plug it into a power outlet or power strip.
2. Check the blue indicator light on the front to verify that the device is turned on. You can use the stickers inside the packaging to cover the light indicator and avoid unnecessary light at night.
3. The STROOM MASTER® has a built-in power outlet that allows you to plug in any other device or appliance with an adapter.
4. Use an EMI meter (electromagnetic interference meter, sold separately) tocheck dirty electricity levels before and after. Recommended levels should be below 150 mV at a minimum, with less than 100 mV being ideal.

Ideally, you should install a STROOM MASTER® in every room (kitchen, family room, living room, home office, bedroom, etc.). Be sure to install it in the bedroom to clean the power lines near your sleeping area. Also remember to install it where your main radiation sources are located (large appliances such as refrigerators, microwave ovens, Smart TVs, etc.)

All homes are different

Just like all people, all houses are different: different number of inhabitants, different needs, more or less devices, some are apartments, others are houses, some are in the city, others in the outskirts… There are thousands of possible variations, and all are important when measuring electrosmog levels in each home.

Based on our experience, we have designed this kit for a standard home with medium levels of electropollution. The products contained in this kit should be enough for a house of about 300 square meters with 3 inhabitants.

But your case could be different, as your house or family could be larger/smaller, you could have an electrohypersensitive family member, or your house could be near a radio base station or a power plant. These are factors that could change the environmental conditions of your home. We’re here to help you determine what to add to this kit to achieve the best results.